Folding Machine for Staggered Type Fin Evaporator
Product Composition and Structure
The equipment is composed of workbench, tension device, folding device, length adjustment device and electric control device. The whole set of action is driven by oil cylinder, while the electric appliance is controlled by relay.
I. The workbench is the square tube and welded-steel plate construction, and equipped with two pneumatic jointers and the air valve group.
II. Tension device is composed of tension cylinder and dead plate, guide components and tension dropheads.
III. The folding device is composed of folding cylinder and mounting plate, two racks for reverse heads and diagonal making head components. The diagonal making cylinder drives the diagonal making axles in diagonal making head components to rotate through gear rack, and the pipes in the axles can be made diagonal when the diagonal making axles in the two sliding plates rotate towards reverse directions.
IV. The size adjustment device is composed of lead screw, feeding box/ sliding box and their base, bearing pedestal, locknut and hand wheel. The bearing pedestal is integrated with the roof of guide component, tension cylinder is installed in feeding box/ sliding box base, and shake the hand wheel and rotate the lead screw to adjust the distance between tension dropheads and folding diagonal making heads.
V. The low-voltage apparatus of electric control gear adopts the Schneider brand.
Equipment Operating Instructions
Firstly, adjust the distance between tension dropheads and folding diagonal making heads through lead screw according to the product length, to make it conform to the size requirements of product. Put the single chips after diagonal making into 3 R module, tread the foot pedal, tension cylinder to drive the tension dropheads move a certain distance upward, and make the pipes tension; next, the folding cylinder promotes the folding diagonal making axles to rotate through gear rack, and rotate the two round heads at the end of single chips by 60° and 120° in the multiple of 1:2 in reverse directions; after the reverse is in place, the tension cylinder is restored to loosen the pipes; then the folding cylinder is restored. At this time, take out the workpieces by hand.
Equipment Maintenance
Operators can only operate the equipment after they get familiar with the equipment structure, performance and its essential points of operation.
| Feature |
The compressed air is generally adjusted to be 0.5-0.8Mpa. |
| It needs to add the lubricating oil once per shift between the friction surfaces of rack and guide box; it also needs to add the lubricating oil once per shift between the friction surfaces of linear bearing and guide rod of tension dropheads. |
We, Ningbo Xin Chang Machinery Co.,Ltd are a professional designer and manufacturer in friction welding machine, resistance welding machine and Heat exchanger equipment. Our factory is in this line more than 20 years, we have more than 10 senior mechanical and electrical specialists and total more than 200 staff, our machine is famous in China. We have CCC, ISO9001 and CE certificates.
Over the years, we have exported so many machines to 30 and more countries, such as France,Spain,Poland,Russia,Indonesia,Vietnam,Pakistan,India,Mexico,Egypt etc.
Our main products are Heat exchanger equipment, Friction welding machine, spot welding machine, projection welding machine, butt welding machine, seam welding machine, multi head welding machine for wire mesh, and other various special welding machine for metal connection in different industries.
We always adhere to the management idea of "Integrity, profession, innovation, and win-win", to make Xin Chang becomes trustworthy enterprise of customers. Good product quality, perfect after-sales service, and professional technical support make customers choose no regrets and worry-free use.
1.Q: What about your standard delivery date ?
A: Usually 30-60 working days. Our company provide just-in-time delivery
2.Q: How can you guarantee quality?
A: You could test samples before order,and we have professional QC and precise machining equipment; Always final Inspection before shipment;
3.Q: How long is the guarantee?
A: For one year after the custumer received the machine.
4.Q: What do we need to do if the machine fails?
A: In the guarantee time (1 year),we will send the spare parts to you for free,and provide the technical consultant for any time.
5.Q: Can I make my own design and logo on the product?
A: Yes, we do OEM.Welcome global partners.
6.Q: what is the packing mode?
A: wooden case or FCL with container.
7.Q: what is your after-sell service?
A: After-Sales
1) Training your workers how to install the machine, how to use the machine.
2) Engineers available to service machinery overseas
3) 1-year guarantee ( free maintain in a year)
4) Replacement parts and other accessories provided
Audited Supplier 
){kind=link}
){kind=link}